Defi-Link Fitting Kit is to mount a gauge on an A-pillar or a steering
column. This product is for 2 1/16"(52mm), 2 3/8"(60mm),
and 3 1/8"(80mm) gauges.
Meters can be mounted on an A-pillar
or a steering column.
Free installation angle
Defi-Link Fitting Kit -
PARTS LIST -
Two types of fitting kit are included in one package. Type A (width
33mm version) is for ADVANCE series. Type B (width 23.3mm version)
is for Defi-Link series(52mm/60mm/80mm) and Racer gauge series(52mm).
Choose suitable for your gauge.
Use M4x40 bolt instead of M4x30 bolt when ADVANCE series are installed.
Defi-Link Fitting Kit -
HOW TO INSTALL -
1.
Take the resin part of A-pillar or steering column apart.
2.
Drill 2 holes in the resin(0.17in diameter).
(Picture 1)
3.
Fasten the metal fitting and rubber fitting with two M4 x
12 bolts and two nuts to the resin.
(Picture 1)
4.
Fix the resin part where it was.
5.
Fix a meter cup(sold separately) to the metal fitting with
a M4 x 30 bolt and a nut.
(Picture 2)
6.
Attach the buffer around the meter.
(Picture 3)
7.
Fit the meter into the meter cup(sold separately) and connect
wires.
(Picture 4)
Use M4x40 bolt instead of M4x30 bolt when ADVANCE series are
installed.
This product is designed for Defi-Link Meter series(except
4 1/2in dia), Defi-Link Meter BF series, and ADVANCE series.
Meter cup and holder need to be purchased.
Do not install this product where it may disturb the driving
sight.
Visit eShocks.com for great prices on premium Bilstein, Edelbrock and Koni shocks and struts for street, off-road and racing. Save on shipping by combining an order with your gauges!
Automotive
Defi-Link Fitting Kit is to mount a gauge on an A-pillar or a steering
column. This product is for 2 1/16"(52mm), 2 3/8"(60mm),
and 3 1/8"(80mm) gauges.
