The production of Defi-Link Indicator
II has been ended in April, 2010.
Defi-Link Indicator II is a warning indicator which can be connected
to Defi-Link Meter, Defi-Link Meter BF, Defi-Link Display, and Step
Graph. Two LEDs(green & red) are built-in and each LED blinks
separately. By connecting this product to Defi-Link Control Unit
II, it can be used as a "Master-Warning" indicator.
Machined finished surface of aluminum
High visibility by a large diameter
body and super high bright LEDs
LEDs blink simultaneously with the
Defi-Link System
Can be attached to various positions
Can be used for various purposes with
two LEDs
No-warning
Green
Red
Green and Red
Defi-Link Indicator II -
MOVIE -
Green LED>>Warning for the water temperature gauge(over 100)
Red LED>>Warning for the tachometer(over 7,500RPM)
Defi-Link Indicator II -
SPECIFICATIONS -
Power Supply Voltage
Supplied from Control Unit II
or Control Unit (Exclusive for 12V vehicle)
Operational Temperature Range
-20 to +60,
-4 to +140
(under 80% relative humidity)
Operational Temperature Range
-20 to +60,
-4 to +140
(under 80% relative humidity)
Gross Weight
150g, 0.33lb (including wires
and package)
Connectable Products
Defi-Link Meter
Defi-Link Meter BF
Defi-Link Display
Defi-Link Control Unit II
Step Graph
Defi-Link Indicator II -
PART NAMES AND DIMENSIONS IN MM (INCHES) -
Defi-Link Indicator II -
PARTS LIST -
Parts List
Quantity
Indicator II (mounting parts included)
1
Indicator wire 1m (3 1/3ft)
2
Double-sided tape
1
Operation manual
1
Terms and Conditions
1
Optional Parts / Replacement Parts
Part Number
Indicator wire 1m (3 1/3ft)
PDF01802H
Indicator wire 13cm (5 1/8ft)
PDF01803H
Mounting Parts
PDF05803G
Defi-Link Indicator II -
HOW TO INSTALL -
1.
Bend the mounting bracket along the form where the indicator
is attached.
2.
Adjust the angle of the indicator.
3.
Connect the indicator wires to the connectors on the backside
of the indicator.
4.
Attach the indicator on a instrument panel or steering column
by using double-sided tapes.
5.
Connect the indicator wires to Defi-Link Meters, Defi-Link
Meter BFs, Defi-Link Displays, Defi-Link Control Unit II, or
Step Graph.
Attach this product in a location which will not hinder
driving.
Tighten the screws for the mounting bracket when it is loose.
Fixing the mounting bracket with tapping screws is recommended
to prevent the product from falling off.
Refer to the operation manual of the Defi-Link Control Unit
II or the Defi-Link Control Unit for setting the numerical
value of warning.
Defi-Link Indicator II -
Examples of how the indicator is used-
<A>
Green LED
Use as a warning indicator of oil pressure by connecting it
to the Defi-Link Meter Oil Pressure.
Red LED
Use as a shift-up indicator by connecting it to the Defi-Link
Meter Tachometer.
<B>
Green LED
Use as a warning indicator of oil pressure and oil temperature
in the dual gauge mode by connecting it to the Defi-Link Display.
Red LED
Use as a warning indicator of boost pressure by connecting
it to the Defi-Link Meter BF Turbo.
<C>
Green LED
Use as a master warning indicator of all the connected gauges
by connecting it to the Defi-Link Control Unit II.
(DF05002: There is no output of tachometer signal to Indicator
2.)
Red LED
Use as a warning indicator of boost pressure by connecting
it to the Defi-Link Meter Boost.
How to connect wires
Red LED >> Warning for tachometer, Green LED >> Warning
for oil temperature gauge
Visit eShocks.com for great prices on premium Bilstein, Edelbrock and Koni shocks and struts for street, off-road and racing. Save on shipping by combining an order with your gauges!
Automotive
Defi-Link Indicator II is a warning indicator which can be connected
to Defi-Link Meter, Defi-Link Meter BF, Defi-Link Display, and Step
Graph. Two LEDs(green & red) are built-in and each LED blinks
separately. By connecting this product to Defi-Link Control Unit
II, it can be used as a "Master-Warning" indicator.
)
(under 80% relative humidity)
