 |
|
|
|
|
| |
Ignition off |
Ignition on
(White Model)
| Ignition on
(Amber Red Model) |
Ignition on
(Blue Model)
|
Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. |
|
The illumination color can be chosen from white,
amber red, and blue.
*The illumination color cannot be changed.
| White Model |
Amber Red Model |
 |
 |
|
|
Gorgeous Opening mode and Ending mode:
 
|
|
Single Meter Visor
can be attached. |
|
 Regular
Position Bezel can be attached. |
|
The scale can be chosen between SI units(kPa,
 )
and Imperial units(PSI,  ).
|
|
Brightness can be adjusted. There are 10 stages
of brightness, 5 stages in the daytime and 5 stages in the nighttime.
The brightness decreases being interlocked with the illumination
switch on. The decrease in lights can be canceled. |
|
Driving data can be stored and can be replayed
up to 3 minutes. |
|
Double Warning function by a meter's LED lamp
and a beep |
|
If Defi-Link Indicator(sold separately) is connected,
it blinks when any of connected meters' warning LED light. |
|
Defi-Link Indicators can be connected to each
gauge. |
|
Differential pressure between fuel pressure and
turbo can be shown if both of fuel pressure meter and turbo
meter are installed. |
 |
Defi-Link Control Unit II is necessary to operate
Defi-Link Meter BF. |
|
Defi-Link BF Gauges are not compatible with the Advance BR/CR/ZD Series or the Advance Control Unit |
|
Defi-Link Meter BF is applicable only
for 12V vehicles. |
Automotive 
